Dscp on Aaron's Worthless Words

QoS Notes - IPP and DSCP Values

Tue, 30 Jul 2013 00:00:00 +0000

This is a study note post, so please don’t take this as written. I’m not the authority on the subject, so please correct me if needed.

Back in the day, somebody decided that we all needed to have a Type of Service (ToS) field in the header of IP packets. Only God knows what this spawn of Satan wanted to do with it, but we’re stuck with it on the CCIE R&S exams.

ONT Notes - QoS On Wireless Networks

Thu, 11 Feb 2010 00:00:00 +0000

Wireless LANs (WLANs)
- Extensions to wired LANs
- Carrier sense multiple access collision avoidance (CSMA/CA) as media access method
- Uses distributed coordinated function (DCF) for collision avoidance
- DCF is based on RF carrier sense, inter-frame spacing (IFS), and random wait timers
Wifi QoS standards
- 802.11e
  - IEEE standard
  - 0-7 priority levels
- Wifi Multimedia (WMM)
  - Four access categories
    - Platinum (voice) - 6 or 7 802.11e
    - Gold (video) - 4 or 5 802.11e
    - Silver (BE) - 0 or 3 802.11e
    - Bronze (Background) - 1 or 2 802.11e
- WMM and 802.11e replace DCF with EDCF
Cisco Split-MAC
- Splits functions between Lightweight access points (LWAPs) and WLAN controllers (WLCs)
- LWAPs handle real-time functions
  - Beacon generation
  - Probe transmission and response
  - Power management
  - 802.11e/WMM scheduling and queuing
  - Packet buffering
  - Encryption/decryption
  - Control frame/message processing
- WLCs handle non-real-time functions
  - Association/disassociation/reassociation
  - 802.11e/WMM resource reservation
  - 802.1x EAP
  - Key management
  - Authentication
  - Fragmentation
  - Ethernet-WLAN bridging
End-to-end QoS
- Step 1: WLC copies DSCP from switch to outer DSCP and outer 802.1p and sends to LWAP over LWAPP tunnel
- Step 2: LWAP copies outer DSCP from WLC to 802.11e/WMM field and sent to client
- Step 3: LWAP copies 802.11e/WMM value from the client to outer DSCP and sends it to WLC
- Step 4: WLC copies outer DSCP from WLAP to 802.1p (CoS) fields and sends it to the switch
Web interface (do you even need to know this?)
- Controller>QoS Profiles
  - Per-User Bandwidth Contracts - set avg data rate, burst data rate, avg real-time rate, and burst real-time rate
  - Over the Air QoS
    - Maximum RF usage per AP (%)
    - Queue Depth - queue size before dropping packets
    - Wired QoS Protocol - 802.1p or None
- Controller>WLANs>Edit
  - For each WLAN ID, set the QoS value: plat, gold, silver, bronze
  - WMM Policy
    - Disabled - 802.11e/WMM QoS requests are ignored
    - Allowed - 802.11e/WMM QoS requests are sent
    - Required - 802.11e/WMM QoS requests are required

ONT Notes – Classification, Marking, and NBAR

Fri, 22 Jan 2010 00:00:00 +0000

Here’s another set of notes from my ONT studies. I’m sure someone will find it useful. Please help to correct dumbass mistakes.

Classification is done with traffic desriptors
- Ingress interface
- CoS value on ISL or 802.1P frames
- Source/destination IP address
- IP Precedence or DSCP value
- MPLS EXP
- Application type
Layer 3 QoS
- Type of Service (ToS) is 8-bit field.
- First 3 bits of ToS are the IP precedence.
- First 6 bits of ToS are the DSCP value.
- Last 2 bits of ToS are explicit congestion notification (ECN).
Layer 2 QoS